德清通和塑料研究所

Polytetrafluoroethylene(PTFE) Sheet

Molded Sheet ( Include bridge bearing slide ) ,Skived Sheet

Characteristic of the products

PTFE molded sheet is manufactured by molding with PTFE granular resin.PTFE is the most chemical resistance of all know plastics.It does not age.It has the lowest coefficient of friction of all know solid materials.

Use of the products

It can be used to make corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different
frequency, bridge bearing slide.

Products index
　

Project	Unit	Standard
Tensile strength	MPa	≥15.0
Ultimate elongation	%	150 ～400
Apparent density	g /cm ³	2.2 ～2.3
Dialectic strength	KV/mm	10
Resistance of surface (Working voltage 500V)	Ω	3.7 x 10 ¹⁶

Product specification (Unit: mm)

Name	Thickness	Public errand	length x width
Mould Press Sheet	1～70	± 0.30～± 0.50	250 x 250
	1～70	± 0.30～± 0.50	300 x 300
	1～70	± 0.30～± 0.50	500 x 500
	1～70	± 0.30～± 0.50	600 x 600
	1～70	± 0.30～± 0.50	800 x 800
	2～60	± 0.30～± 0.50	1000 x 1000
	2～60	± 0.30～± 0.50	1200 x 1200
	3～60	± 0.30～± 0.60	1200 x 1800
	3～60	± 0.30～± 0.60	1000 x 2000
	3～60	± 0.30～± 0.60	1200 x 2000

There are two types of bridge bearing slide, rectangular or round shaped, which can be made to order.

Name	Thickness	Width	Length
Skived Sheet	0.5～3.0	900	≥200
		1000
		1200
		2000