Product

PTFE Filling Material

Product characteristics

Types of fillers

Characteristic

glass fibre

Good wear resistance.

Glass Fiber+Graphite

Good cold flow resistance and wear resistance.

Glass Fiber+Molybdenum Disulfide

Good wear resistance, cold flow resistance and electrical insulation.

graphite

Early wear and friction coefficient are small and heat conductivity is good.

bronze

The wear resistance, hardness and compressive strength are improved, and the heat conductivity is good.

C + graphite

It has good cold flow resistance and load characteristics under high temperature and high load.

carbon fibre

Wear resistance in water, load characteristics and bending strength under high temperature and high load are good.

Note: In addition to the above, other fillers are also produced. Please select and use them according to the purpose of use.

 

Product use

1. Anti-corrosive insulating pipes for insulating sheaths, anti-corrosive pipes and various corrosive environments.

2. Heat exchangers, lubricating bearings, piston rings, oil seals and sealing rings, etc.

3. Anti-sticking materials used in construction and guideway.

4. According to customer requirements, different filling materials are added to enhance the required performance.


Product specification

Note: because there are many mold combinations for the products, please discuss the specific product specifications separately. 

           size

classification

external diameter(mm)

internal diameter(mm)

wall thickness(mm)

length(mm)

Moulded tube

12~950

6~700


20~400

Extrusion pipe


10~445

2~10

≥1000

Push pipe


0.3~40

0.1~5.0

≥1000

Product classification

Moulded tube

Pipes are made by moulding and divided into pure material pipes and filling pipes (color pipes, copper powder pipes, glass fibre pipes, graphite pipes, carbon fibre pipes, carbon black pipes, polyphenyl pipes, etc.).

Extrusion pipe

The suspended polytetrafluoroethylene resin is extruded by plunger.

push pipe

The imported dispersed polytetrafluoroethylene resin was manufactured by paste pressing.

 

Main Technical Indicators

entry name

unit

Pure PTFE Index

Apparent density

g/cm3

2.10~2.30

tensile strength

MPa

≥18

elongation at break

%

≥230


CONTACT US

Tel: 0572-8286389    zip code: 313200

Fax: 0572-8286292   email: info@conceptfe.com

Address: no. 9 guangming street, wukang moganshan economic development zone, deqing county, zhejiang province

WeChat Official Account WeChat Official Account

Copyright ©//www.cn86.cn/ Zhejiang deqing conceptfe plastic products co. LTD   Powered by:www.hzzqsc.com